ASMA 6.0.1 bending software

$49.99

Description

Please enter banners and links.

ASMA 6.0.1 bending software

Calculates everything from Bend Deductions to Die Widths, warns of overloads based on the tooling and methods you are using; setting load limits as part of your input. Know what’s going to happen and make the parts right the first time.

From your inputs: Material type, material thickness, desired inside radius, forming method (air, bottom or coin) and the desired bend angle complementary and this software will tell you the inside radius of the part, find you the Bend Deduction, Bend Allowance and Outside Setbacks.  

ASMA 6.0.1 bending software will also select a geometrically perfect die width and then allows you to enter the die width you are using. It will then recalculate and compare side by side with the perfect die with the one you intend to use.

The software a product of Asma LLC also warns you of over tonnages based on your inputs.

This is not a CAD system, rather it means to complement it and give to you the correct information your CAD system needs to know, so that way your flat blanks are always correct..

PLEASE NOTE THE GRAPHIC BELOW it EXPLAINS HOW TO DOWNLOAD YOUR PURCHASE

ASMA 6.0.1 bending software

ASMA 6.0.1 bending software

Please enter banners and links.

Reviews

There are no reviews yet.

Be the first to review “ASMA 6.0.1 bending software”

This site uses Akismet to reduce spam. Learn how your comment data is processed.